Validation of two-layer model for underexpanded hydrogen jets

Previous studies have shown that the two-layer model more accurately predicts hydrogen dispersion than the conventional notional nozzle models without significantly increasing the computational expense. However, the model was only validated for predicting the concentration distribution and has not been adequately validated for predicting the velocity distributions. In the present study, particle imaging velocimetry (PIV) was used to measure the velocity field of an underexpanded hydrogen jet released at 10 bar from a 1.5 mm diameter orifice. The two-layer model was the used to calculate the inlet conditions for a two-dimensional axisymmetric CFD model to simulate the hydrogen jet downstream of the Mach disk. The predicted velocity spreading and centerline decay rates agreed well with the PIV measurements. The predicted concentration distribution was consistent with data from previous planar Rayleigh scattering measurements used to verify the concentration distribution predictions in an earlier study. The jet spreading was also simulated using several widely used notional nozzle models combined with the integral plume model for comparison. These results show that the velocity and concentration distributions are both better predicted by the two-layer model than the notional nozzle models to complement previous studies verifying only the predicted concentration profiles. Thus, this study shows that the two-layer model can accurately predict the jet velocity distributions as well as the concentration distributions as verified earlier. Though more validation studies are needed to improve confidence in the model and increase the range of validity, the present work indicates that the two-layer model is a promising tool for fast, accurate predictions of the flow fields of underexpanded hydrogen jets.     

Synthesis and photocatalytic performance of MoS2/Polycrystalline black phosphorus heterojunction composite

As a promising catalyst for solar hydrogen production, black phosphorus (BP) has received widespread attention due to variable band gaps, high carrier mobility, and strong light absorption performance. Herein, we use MoS₂ as a cocatalyst to synthesize BP/MoS₂ catalyst with polycrystalline BP to improve photocatalytic performance under visible light irradiation. A small amount of MoS₂ can reduce the recombination of electron-hole pairs in the composite, increase carrier transport efficiency, and then improve photocatalytic performance. As expected, the 10/0.5 ratio of BP/MoS₂ catalyst exhibits the highest photocatalytic hydrogen evolution performance with a hydrogen evolution rate of 575.4 μmol h^?1 g^?1, which is 2.5 times of pure BP. Based on the results above, a simple method is provided to synthesize low-cost black phosphorus-based photocatalysts.     

Sn-induced CuO–CeO2 catalysts with improved performance for CO preferential oxidation in H2-rich streams

Sn modified CuO–CeO₂ catalysts with different Sn loadings were prepared by a facile, green and solvent-free method. The effect of Sn/Ce ratio over Sn–Cu–Ce-x (x = 0, 1, 2.5, 5, 7.5) samples on CO activity and O₂ selectivity was investigated. The samples were characterized by various techniques using N₂-adsorption/desorption, XRD, H₂-TPR, XPS, Raman and in-situ DRIFTS. It was revealed that stronger interaction between acitve sites and support, higher amounts of Sn²⁺ and Ce³⁺, associated with increased amount of oxygen vacancies, were observed on the catalyst of Sn–Cu–Ce-5. As a result, the optimized catalyst displayed an excellent catalytic performance even in the presence of CO₂ and H₂O. In this sense, probing the Sn modified CuO–CeO₂ catalyst can elucidate some useful keys for the development of high CO₂ and H₂O-resistance catalyst during CO-preferential oxidation in H₂-rich streams.     

Simulation and analysis of dual-reflux pressure swing adsorption using silica gel for blue coal gas initial separation

A dual-reflux pressure swing adsorption (DR-PSA) process was proposed and simulated to initially separate the blue coal gas, aiming to capture carbon dioxide (CO₂) and enrich hydrogen (H₂), simultaneously. With a feed flow rate of 7.290 slpm, a light product reflux flow rate of 0.505 slpm and the heavy product reflux flow rate of 3.68 slpm, the developed DR-PSA process could capture CO₂ up to 64.01% with a recovery of 99.60% and enrich H₂ up to 34.66% with a recovery of 97.63% from the blue coal gas (36.2% N₂/28.5% H₂/13.9% CO/12.7% CO₂/8.7% CH₄). In addition, in order to optimize the process, the effects of various operating parameters on the DR-PSA process performance in terms of product purity and recovery were discussed in detail, including the feed position, the light product reflux ratio and the heavy product reflux ratio. Moreover, the dynamic distribution behaviors of pressure, temperature and gas-solid concentration were presented to explain and evaluate the process separation performance in depth under different operating conditions.     

Design and synthesis of side-chain optimized poly(2,6-dimethyl-1,4-phenylene oxide)-g-poly(styrene sulfonic acid) as proton exchange membrane for fuel cell applications: Balancing the water-resistance and the sulfonation degree

Side-chain optimized poly (2,6-dimethyl-1,4-phenylene oxide)-g-poly (styrene sulfonic acid) (PPO-g-PSSA) is designed with balanced water-resistance and sulfonation degree. The PPO-g-PSSA is synthesized by controlled atom-transfer radical polymerization (ATRP) from brominated poly (2,6-dimethyl-1,4-phenylene oxide) (PPO-xBr) and ethyl styrene-4-sulfonate and followed by hydrolysis. A series of PPO-g-PSSA are prepared possessing different bromination degree (x) of PPO-xBr and polymerization degree (m) of the side-chains and the water-resistances of the fabricated membranes are investigated. The results show that a PPO-g-PSSA at relatively low x (x < 0.2) and high m (m > 4) exhibits good balance between the water-resistance and the sulfonation degree. Namely, it displays suitable proton conductivity with compromised water-resistance. Moreover, a maximum ion exchange capacity (IEC) of 3.24 mmol g^?1 is reached without the sacrifice of water-resistance. In addition, PPO-g-0.08PSSA-13 and PPO-g-0.14PSSA-4 are chosen characterized by thermogravimetric analysis, proton conductivities and mechanical properties. At 90% RH, the optimized PPO-g-0.08PPSA-13 possesses a proton conductivity of 37.9 mS cm^?1 at 40 °C and 45.5 mS cm^?1 at 95 °C, respectively.     

Metagenomic analysis revealed the individualized shift in ileal microbiome of neonatal calves in response to delaying the first colostrum feeding

The aim of this study was to explore the effect of colostrum feeding time on the ileal microbiome of neonatal calves. In this study, 22 male Holstein calves were randomly assigned to different colostrum feeding time treatments: after birth (at 45 min, n = 7); at 6 h after birth (n = 8); and at 12 h after birth (TRT12h; n = 7). At 51 h after birth, calves were killed and ileum digesta was collected for microbiome analysis using shotgun metagenomic sequencing. Bacteria, archaea, eukaryotes, and viruses were identified from the ileum microbiome. For the bacteriome, Firmicutes and Proteobacteria were the predominant phyla, and Escherichia, Streptococcus, Lactobacillus were the 3 most abundant genera. For the archaeal community, Euryarchaeota and Crenarchaeota were the 2 major phyla, and Methanosarcina, Methanobrevibacter, and Methanocorpusculum were the 3 most abundant genera. In total, 116 Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were identified from the ileal microbiome, with “biosynthesis of vancomycin group antibiotics,” “biosynthesis of ansamycins,” “valine, leucine, and isoleucine biosynthesis,” “ribosome,” and “d-alanine metabolism” as the top 5 functions. When the ileal microbiomes were compared among the 3 treatments, the relative abundance of Enterococcus was higher in TRT12h calves, suggesting that calves may have a higher abundance of opportunistic pathogens when the feeding of colostrum is delayed for 12 h. Moreover, among all KEGG pathways, the enriched “taurine and hypotaurine metabolism” (KO00430) pathway was identified in the ileal microbiome of TRT12h calves; however, future studies are needed to understand the effect on the host. Additionally, 2 distinct ileal microbial profiles were identified across all samples, indicating that that host factors may play a significant role in driving varied microbiome changes in response to colostrum feeding time. Whether such microbiome shifts affect long-term gut function and calf performance warrants future studies.     

Recent progress of green sorbents-based technologies for low concentration CO2 capture

The increased concentration of CO₂ due to continuous breathing and no discharge of human beings in the manned closed space, like spacecraft and submarines, can be a threat to health and safety. Effective removal of low concentration CO₂ from the manned closed space is essential to meet the requirements of long-term space or deep-sea exploration, which is an international frontier and trend. Ionic liquids (ILs), as a widespread and green solvent, already showed its excellent performance on CO₂ capture and absorption, indicating its potential application in low concentration CO₂ capture. In this review, we first summarized the current methods and strategies for direct capture from low concentration CO₂ in both the atmosphere and manned closed spaces. Then, the multi-scale simulation methods of CO₂ capture by ionic liquids are described in detail, including screening ionic liquids by COSMO-RS methods, capture mechanism by density functional theory and molecular dynamics simulation, and absorption process by computational fluid dynamics simulation. Lastly, some typical IL-based green technologies for low concentration CO₂ capture, such as functionalized ILs, co-solvent systems with ILs, and supported materials based on ILs, are introduced, and analyzed the subtle possibility in manned closed spaces. Finally, we look forward to the technology and development of low concentration CO₂ capture, which can meet the needs of human survival in closed space and proposed that supported materials with ionic liquids have great advantages and infinite possibilities in the vital area.     

Evaluating the profile of myofibrillar proteins and its relationship with tenderness among five styles of dry-cured hams

In order to investigate the relationship between profile of myofibrillar proteins and tenderness among 2 kinds of Chinese hams (Jinhua and Xuanwei) and 3 kinds of European hams (Iberian, Serrano and Parma), shear force, myofibril fragmentation index (MFI), SDS-PAGE, carbonyls content and Raman spectroscopy were investigated. The shear force and salt content of Chinese hams were significantly higher than that of European hams, while moisture content was lower than that of European hams (p < 0.05). MFI values and SDS-PAGE profile revealed that the degradation of myofibrillar proteins in Chinese hams was lower than in European hams. In addition, Chinese hams showed significantly higher carbonyls content and β-sheet content compared with European hams, indicated that proteins aggregation intensively inhibited the degradation of myofibrillar proteins in Chinese hams. These results indicated that the higher shear force in Chinese style hams could be attributed to the lower moisture content and limited proteolysis.     

深基坑工程中交叉地下涵道拆除施工技术

由于涵道穿越站前广场下方,进入规划新建北广场地下广场基坑内.针对既有车站站前广场上开挖地面,拆除交叉地下涵道,通过围堰加钢板桩防止河道河水倒灌回流,应用OptumG2进行围堰可靠性模拟,确定围堰形式.钢板桩采用单元组打入法,提高打入精度和质量.使用翻转晾晒加水泥拌和的综合处理方法对涵道淤泥进行固化处理,对所处涵道进行拆除,保证深基坑桩基施工.     

Study of neutron production and moderation for sulfur neutron capture therapy

Neutron capture therapy with Sulfur-33, similar to boron neutron capture therapy with Boron-10, is effective in treating some types of tumors including ocular melanoma. The key point in sulfur neutron capture therapy is whether the neutron beam flux and the resonance capture cross section of ~(33)S(n;α)~(30) Si reaction at 13.5 keV can achieve the requirements of radiotherapy. In this research,the authors investigated the production of 13.5 keV neutron production and moderation based on an accelerator neutron source. A lithium glass detector was used to measure the neutron flux produced via near threshold~7 Li(p,n)~7 Be reaction using the time-of-flight method. Furthermore, the moderation effects of different kinds of materials were investigated using Monte Carlo simulation.